Product Introduction
BLH-1700 series of experiments are used to mill wheat flour milling equipment dedicated instrumentation powdered sample preparation required to grind wheat flour dough suitable for physics experiments, between curves used in the laboratory to evaluate the use of silty quality wheat flour for the production of high ash content of wheat flour.
I produced the experimental mill has been widely used by many food quality inspection agencies, flour production enterprises.
Features
1. Grinding high speed, large capacity

2. Grinding chamber fixed spacing, sample preparation are stable, long life
3. Small size, operation and maintenance simple and convenient
4. Cost-effective

Normal job requirements
1. Ambient temperature: 0-40 ℃
2. Relative humidity: ≤85% RH
3. Power supply: 380V ± 10%, 50Hz
4. Samples Moisture: ≤17%
5. Level work surface, solid, without shaking at work
Main technical specifications
1. Polishing rate: ≤50-100g / min (the higher the water sample, the slower polishing rate)
2. Flour yield: 60% to 75% (in general, depending on the quality of the sample may be)
3. Ash: ≤0.7% (dry basis)
4. Recovery: ≥98%
5. Motor power: 370W
Related technical parameters
1. Roller Technical parameters
Roller Shape: Φ70mm × 30mm
Roller teeth: first roller: 110 teeth
The second roller: 220 teeth
The third roller: 330 teeth
The fourth roller: 360 teeth
2. Roller gap
The first roller and the second roller gap between the teeth: 0.75mm
The second roller and the third roller gap between the teeth: 0.04mm
The third roller and the fourth roller gap between the teeth: 0.03mm